My assigned projects will be provided below.
LOGOS AND COLORS
I like these logos because they are simple but also states what it is about.
Bright Pink: Vibrant
Blue Purples: Mysterious
Bright Green: Lush
Sky Blue: Calming
Golden Yellow: Comfort
3 TRUTHS AND A LIE
I have 3 sisters and 1 brother..?
I have owned 10 dogs in my life so far..?
My mom is superstitious and made me skip my 13 birthday..?
I have lived in 6 different houses in my life so far..?
Today I finished my senior class shirt.
I started by making my text, 2018, for my graduation year.
I added the graduation silouhette and added and coped and padted from another file and then I took the eraser tool and rounded the bottom edges, and also changed the opacity for that layer from 100% to 60%. To lighten it.
I then added my quote to it, From this Steeping Stone, to the next, and for the top part I went the creat warped text option and changed it to Shell Upper.
And for the bottom text I went back to the add warped text option and chose Shell Lower.
I then added just regular text that says ALVA SENIOR CLASS. to underneath, To the Next.
I then copyed and pasted the goldbug mascot to both side of the very bottom text and changed their opacities to 60%.
Today I worked on my assigned project for a magazine cover.
I first took this picture of this model and used the magnetic lasso tool and selected, very carefully, around her body so there would be no background.
I then went down below the layers panel and selcted layer mask. I then right click on the photo and duplicated the layer onto my cover.
I choose they magazine ‘Women’s Health’ and so I choose the font, from dafont.com, Vonique 92 and made my title.
I then chose my color, I was going for a mellow pink color.
I then out my text layer under the model and used the eraser tool and used that to thin out her loss hairs.
Today i worked on the Magazine cover.
I changed the name of my magazine and the font I used I used, for the Title, Acne Demo Regular off of dafont. I also put the season the magazine would come out.
I then added my first teasers. I used the purple I used in the tile and black. I made the 35 bigger then the letters, and also in a different font, President regular, and the letters are Myraid Pro. The page number a different font as well, Aerolite Bold.
I added my second teasers to the other side and used the same font for the letters and the page number.
I then added a article headline right under the teaser, to add something a little eye catching.
I added my third teaser under my first one I made. I used the same font for all the numbers and all the letters and also the page numbers.
I then added my fourth teaser and workout with the models name. I again used the same font, president, for the numbers. The same font, myraid pro, for the letters. And, Aerolite, for the page numbers.
I then added a barcode I found on the internet and added it to the bottom right corner by copying and pasting from another file. I also added the price above the barcode.
Today I worked on the election campaign project.
I started with a red background and found a ‘comic explotion.’ I used the magnetic lasso tool to select it and copy and pasted it on to my background.
I then found a thumbs up I liked and did the same with the magnetic lasso tool and copy and pasted it on to my slogon.
I then decided on my slogon (A change we can believe in!) I used the create warped text option and arch it upper.
I did the same to the bottom text but instead if upper arch I did lower arch. ( the letters are going to match the blue )
Today I work on my compaign business card.
I started by added all of his information onto the card using the font Canon Typestar 210.
I then found a photo of trump, with a thumbs up to follow up mt slogon picture, and I used the magnetic lasso tool and selected around him and copied and pasted onto the card.
I then added my slogon onto the bottom of the card using the same font as before, THE PRESIDENT. ( the information text matches the color of Trump’s suit)
Today I worked on the elction campaign project, the bumber sticker and lawn sign.
I started with the image of the flag and copied and pasted from another document.
I then added my slogon onto the bottom of the sign.
I then added the name of my nominee to top using the same font, throughout the whole sticker.
I then added the year that the elction is happening, this year.
I then added my thumbs up to go along with my logo.
I started by added my logo on to the design and changing both opacities to 40%
I then added my slogon for the nominee onto the bottom and then his name at the top, I used the wraped text option and changed it the shell upper and lower.
I then added my finishing add on and put the year and nominee for what.
Today I worked on the campaign project button.
I added his signature flag background and changed the opacity to 100% and the fill to 70%. I also erased the extra into a circle.
I then added the main part of his logo and made the opacity 70%.
I then added my slogon on to the top and added the edit of screen instead of normal.
Today I worked on the election campaign project, banner.
I started with the faded flag and changed the opacity to 70%. I then added the caboom and postioned where I liked it the design to start.
I then finished my logo out with the signature thumbs up over the blast, it was copied and pasted from one of my previous designs.
I then added the name of my canidate and what he is running for and what year, this year. I made the text line up with the right end and then repostioned mt logo to line up good with the text.
I added his slogon onto he bottom of the canidate and made it smaller than the name sohis name is more prevelant then the slogon.
Today I worked on the Election Campaign Project, the newsletter.
I used the Rectangle Tool to make a blue rectangle, for my masthead, I also added a red line underneath it, for Republican colors.
I then added a red circle and a white circle under it to outline it, using the Ellipse Tool.
I then added my kaboom, from a previous design, from my logo under the circle.
I then added a picture of Trump, I used the Magnetic Lasso Tool and then resized it and used the earser tool to fit in in the circle perfectly.
I then added the name of my canidate and his slogon onto the masthead.
Using the Rectangle Tool again I addded another box, for the address, etc.
I then added the signature thumbs up onto where the text boxes will be, underneath the artcles.
Today I worked on the Election Campaign Project, the newsletter.
(I spent a lot of time trying to find information)
I started by adding a brief biography about my canidate, Donald.
I then added the upcoming events of the the canidate, his rallies.
I then added the information for Trump headquarters in New York.
I then added a topic that Trump/Pence has talked about.
Today I went to the Career Center today and worked on ACT practice quizzes.
I then finished my Election Campaign Project newsletter.
I looked on his site and found an additional of three topics he has spoke about. (one from October 31)
I then duplicated the first topic I had on there to make sure the size and style of the font are the same. ( October 29)
I then did the same and duplicated the one right before. ( October 28)
Today I worked on the Black Friday AD, I chose Walmart as my store.
I started with a green background and then I used the shape tool to add a white and red rectangle.
I then put a rounded rectangle at the center top and I then found the Walmart logo and added it to the top off my ad.
I then used the shape tool and added a blue rectangle and used the warped shape mode and made one of the corners inward more. I then added a yellow line “ribbon” and then I found a bow and used the magnetic lasso tool to copy and paste arounf it .
I then added the sale was for the page only for only one hour, I also found a cartoon clock and added it in where the O was supposed to be.
I then added the time of the sale and what day it was happening.
I then added a few products that would be sold at this sale and made them to size of my liking. ( there will be more )
I then used the rounded rectangle shape tool to add the boxes where the prices of the products will be.
Today I worked on the Black Friday AD Project.
I first added the descriptions of the rpoducts I already have on the ad, with the color used for walmart.
I then found and added my other products, i used the magnetic lasso tool on most of them to copy and paste them onto the ad.
I then added the green baxes, using the shape tool, and I then added the prices of each product.
I then added the descriptions of the rest of the products using the same blue.
I then added the red boxes, using the shape tool again, and added what you owuld save on each product.
Today I worked on the “Thankful For” project, the fonts I used were Imprint MT Shadow Regular, Gillie&Hilda Regular, and DK Pimpernel Regular. The colors I usd were tan, off white, and orange.
I strated by adding the Thankful For at the right left and then I placed the words where I thought they fit best and the clors that follw along.
Today I worked on the Thanksgiving Goolge logo project.
I started by, using the font hevetica, I put google on and then added the turkay. I used the magnetic lasso tool to select around the turkey and then I copied and pasted it into the file. also colored the letters to follow along with the turkey. (kind of colored like the actual google logo, ‘G’s are one color, one ‘o’ different from the other, a completely different color for the ‘L’ and the ‘e’ to match the first ‘o’.)
I then copied and pasted the ‘fall’ tree from another file and set the blending mode to mutiply and placed it where the ‘l’ would be.
I then used the shape tool, on custom shape, and added the circle design among the letters, a different position for each.
Today I worked on the NWTC Channel Art and Channel Icon Project.
I stared by added the photos of the Alva and Fairview, OK, centers and sizing them to where they are not close to the edge.
I then used th northwest logo and used the magnetic lasso tool to select around the arrow and added it to the middle of my design.
i then added Alva and Fairview, using the northwest centers logo colors.
I then added the programs each center offers in their center.
Today I finished the NWTC YouTube Channel Art Project, I did the Channel Icon.
I put NWTC (Northwestern Technology Center) and then used the 3D mode on the text and then moved it the way I pleased.
I then added Alva & Fairview, for the centers, in the other color used in the logo. I again used the 3D mode for the text but I did this without the shadow and layed out more.
I then added a design, using the shape tool, I chose the lightbulb because we are the ‘Technology’ centers. I then used the 3D mode and moved it to my liking. (I used the color on the arrow in the school’s logo)
Today I created the letterhead for my end of semester letter. I used the shape tool to create two hollowed circles in the top left corner, I also used the shape tool to out a rectangle in the middle the right edge, in which my information was held. I also found a font, on dafont.com and put a “fancy” M inthe circles at the top. My colors were maroon and light purple. To tie the whole image together I put two rectangles on the bottom, one of each color. I then wrote my letter about what I have learned in this class, what I’d like to do next semester and also what projects I enjoyed most.